How to Wirelessly Pair Your 2.1 Channel Soundbar with Its Subwoofer

Two functional keys are located on the rear panel of the subwoofer:

• Power Switch

  After plugging the subwoofer into the AC power supply, flip this power switch to turn the unit on. Once powered up, the blue status indicator light on the top front of the subwoofer will activate.

• Connection Key (Pair Button)

  This is the dedicated pairing trigger for wireless linkage between the subwoofer and soundbar. Operation rule: press and hold this button, then release it immediately after the blue indicator flashes to start automatic matching.

The blue LED on the subwoofer top tells you the current connection state with simple light patterns:

• Quick flashing blue light: The subwoofer enters pairing mode, waiting to establish a wireless connection code with the soundbar.
• Steady solid blue light: Pairing succeeds; the subwoofer and soundbar are linked for normal audio playback.
• Light off: The subwoofer is in standby mode.

1. Plug the subwoofer into mains power, then toggle the rear Power Switch to the ON position.
2. Check the top blue indicator:
   • If the light turns solid blue automatically: Your soundbar and subwoofer have paired out of the box, no extra operation needed.
   • If the indicator stays dark after power-on: Follow the manual pairing steps below.
3. Manual pairing operation:

   Long press the subwoofer’s Connection Key, and release your finger as soon as the blue status light starts quick flashing. The soundbar and subwoofer will run automatic wireless matching instantly.

4. Confirm successful connection:

   Wait several seconds until the blue indicator changes from quick flash to steady constant light. This solid blue light means the 2.1 soundbar and subwoofer have completed stable wireless pairing, ready for audio use.

If the subwoofer’s power switch is switched on but the front blue status indicator does not light up at all, you must manually trigger the pairing process with the Connection Key:

• Hold down the Connection Key until the blue light begins quick flashing, then release the button. The system will auto-match the soundbar and subwoofer wirelessly.
• Do not disconnect the power supply during the pairing progress.
• Once the blue LED stays lit without flickering, the wireless link is fully set up for your 2.1 channel home audio system.